Turbo Grill Parts for Turbo Grills from Grill Parts Distributors, the Gas Grill Parts Specialist for Gas Grills.

Barbecues Galore Grills
(Turbo Grills / Grand Turbo Grills / Capt' Cook / Grand Hall)
Gas Grill Parts from BBQParts.com

Below we have listed all the parts stock and sell for Turbo, Grand Turbo and Capt' Cook gas grills. We believe this grill brand is and was sold exclusively at Barbecues Galore. Sorry, we do not have cross information to these parts by model number. Please choose carefully. We do not have all parts for all Turbo grills.

All the parts we stock and sell are listed on the website.

Turbo Model Look-Up:

One Low Shipping Charge Per Order - Only $9.89 Per Order

Parts

Description

Price

Cast Iron Oval Burner [CICH]

P/N 20561

in-stock

While Supplies Last.
Many Turbo Stainless Steel grills have used this 20561 burner. We stock and sell this black, cast iron burner. It is also used in many Charbroil professional series gas grill models. The burner is 15 inches long from the front to the end of the venturi tube and 3 1/2 inches wide. There is a long, oval-shaped, opening in the center of the burner. (20561, CICH). Sold individually. Order the quantity you need.

$15.89
Each

Cast Iron Burners [CIT]

P/N 23301

Sorry, we no longer stock or sell this part. You may find it available on other websites. Durable, high quality, cast iron burner has been used for years in grills sold under different brand names. The grills are usually made by Nexgrill and marketed under the brand names of Nexgrill, Jenn Air, Costco, Kirkland, Sunshine and Charbroil. (CIT)

Turbo CI Burners [CITSG] - 3 Pak

P/N 23321-3pak

in-stock

These cast iron burners are the replacement burner for most Turbo Select grills and also replaces the stainless burner used in the Grand Turbo Models. They each measure 2 1/8 inches wide by 16 3/8 inches long. (CITSG-3pak)

$79.89
for 3 Burners

Cast Iron Oval Burner

P/N CICH

in-stock

$15.89
Each

Stainless Steel U Burner

P/N GHU1

in-stock

This stainless steel U-burner is found in Grand Hall grills... sometimes sold under the brand Members Mark. This burner has been difficult to find for some time and we now have available this high quality, exact fit stainless steel replacement burner. Burner is 16 by 5 inches and used in grill models M3905ALP, M3905ANG, 296435, and M5205ALP. GHU1 is a replacement OEM part number P02008004A. Please order the quantity you need.

$59.99
Each

Stainless Steel U Burners - 3 Pak

P/N GHU1-3pak

in-stock

Special Quantity Pricing. By ordering one three-pak here, you will receive three of the GHU1 Stainless Steel Burners with special quantity pricing.
These stainless steel U-burners are found in Grand Hall grills - sometimes sold under the brand Members Mark. These burners have been difficult to find for some time and we now have available these high quality, exact fit stainless steel replacement burners. These burners are 16 by 5 inches and used in grill models M3905ALP, M3905ANG, 296435, and M5205ALP. GHU1 is a replacement OEM part number P02008004A.

$168.00
For 3 Burners

Stainless Steel Tube Burner

P/N 10121

in-stock

Limited Quantities. While Supplies Last.
This straight, stainless steel tube burner is used in some Grand Hall grills. It is 15 3/4 inches long and is 1 3/4 inches in diameter. [n]

$9.49
Each

Stainless Steel Tube Burner [SCTB3]

P/N 10241

in-stock

This innovative, stainless steel tube burner has a formed-in ledge on the edge to protect the burner ports from grease. Measures 14 3/4 inches long and is 1 1/8 inch in diameter. Sorry, our replacement does not have tab for ignitor mounting. (SCTB3)

$9.49
Each

Grand Turbo Ceramic Brick (Set of 4)

P/N GTFT

We are now sold out of this part and we have discontinued selling it. You may find it on other internet websites.
This ceramic brick is used in the Grand Turbo grills. Measures 7 1/16 inches by 4 3/4 inches. Sold in 4-pack. Set of 4 shipped in one pack. Does not come with the wire support rack - sorry, we do not stock or sell the support rack. Please use the measurement to verify this brick is correct for your grill. Order the quantity of 4-packs you need. This four piece ceramic set replaces Turbo OEM part 265504. (GTFT)

USA-MADE Square Ceramic Briquettes. 28 Briquettes per box.

P/N BBQLYX-USA

in-stock

These high-quality, Made in the USA, briquettes are manufactured for us by the leading manufacturer/supplier to a number of high quality, American made brands of gas grills. They fit and work for heat plates in Lynx, Dynasty, and Alfresco gas grills. Can be used in other brands as well. They are a light brown, earth tone color (same as ones used in high end, USA grills) and the same size as the white replacement briquettes sold on the internet. The briquettes are well packaged, in individual boxes of 28 briquettes. They are NOT shipped in bags. The briquettes measure 2 inches square and are 3/4 inch tall. The four sides meet at a flat top - like a cut off pyramid. On the bottom, there is a round recess, approximately 1 inch in diameter, to capture and transfer heat better. We are able to offer these at very reasonable pricing because of our quantity buying. By ordering one box, you will receive one box of 28 briquettes. Order the box quantity you need. The number of briquettes you need depends on the size of the heat plate, and the number of heat plates in your grill. We suggest you count before ordering to get enough. (28 briquettes per box). Highly recommended. (not 41648)
PLEASE NOTE: Outstanding freight rate savings over other web sites - pay only $9.89 per order!

$32.00
Box of 28 briquettes

MM Ceramic Flame Tamers

P/N 97501

in-stock

By ordering quantity one of 97501, you will receive an box of six individual ceramic rectangles - each measuring 8 by 7 1/4 inches each. Each one weights approximately two pounds. The ceramics are sold in packs of six. If you order one 97501, you will receive six individual ceramics. If you order two of 97501, you will receive 12 individual ceramics. And so on.
PLEASE NOTE: Outstanding freight rate savings over other web sites - pay only $9.89 per order!

$29.50
Set of 6

2 inch by 2 inch Ceramic Briquettes One Box Contains 50 Ceramic Briquettes

P/N 41650

We do not stock or sell these brisquettes.
This box of ceramic briquettes contains 50 pre-formed ceramic briquettes that measure 2 inches by 2 inches each. They are used in a number of high quality brands to fit on their heat plate or in their briquette racks. Some of the brands include Lynx, Alfresco, GE Monogram and Dynasty. Order by box - each box contains 50 briquettes.[c0]

Heat Plate - Stainless Steel Frame with 17 Bbriquettes

P/N TCCFT

in-stock

Closeout Pricing - While Quantities Last Made in the USA This heat plate contains 17 briquettes tightly locked into a stainless steel frame to form a heat plate for some models of the BBQ Galore, Captain Cook, and Turbo gas grills. The frame measures 7 1/4 inches by 18 1/8 inches. Please use the measurements and illustration provided to verify it will fit your model.

$24.00
Each

Heat Plate with Briquettes

P/N 94751

Sorry, we are temporarily out of stock of this part until next season - April 15, 2024. Please check back.
Heat Plate with Briquettes. Measures 16 1/2 by 6 1/2 inches. Includes 16 briquettes. Please order the quantity you need.

Stainless Steel Heat Plate [COHP1]

P/N 95131-SS

in-stock

This stainless steel heat plate measures 6 and 1/4 inch by 16 1/2 inches. Angled with peak and holes go down each side. (COHP1)

$12.89
Each

Porcelain Steel Heat Plate

P/N 95131

We do not stock or sell this heat plate This porcelain steel heat plate is used in many Turbo gas grill models. The heat plate measures 6 1/4 inches by 16 1/2 inches. [f]

Steel Rock Grate

P/N 95301

in-stock

Closeout Pricing - While Quantities Last This rock grate measures 17 and 1/2 inches by 23 and 1/2 inches. It is made to fit a number of Turbo three burner gas grill models.

$18.00
Each

Steel Rock Grate

P/N 95401

in-stock

Closeout Pricing - While Quantities Last This rock grate measures 17 and 1/2 inches by 28 and 1/2 inches. It is made to fit a number of Turbo 4 burner gas grill models.

$21.00
Each

Rotary Igniter With Knob, Two Outlets [UP-6B]

P/N 03220

in-stock

This TWO outlet rotary igniter is shipped with knob included. (UP-6B).

$12.89
Each

Rotary Igniter With Knob, One Outlet [UP-5B]

P/N 03200

in-stock

This one outlet, rotary igniter is shipped with the knob included. (UP-5B).

$9.89
Each

Rotary Igniter With Knob, Three Outlets [UP-8B]

P/N 03230

in-stock

This three outlet, rotary igniter is shipped with the knob included. (UP-8B).

$14.89
Each

Collector Box and Electrode [IG-17B]

P/N 02623

in-stock

Collector Box and Electrode. (IG-17B)

$7.49
Each

Push Button Igniter with Lock Nut Mounting

P/N UP7B

in-stock

This is a double pole push button igniter switch that mounts in place with a locking nut on the threaded body of the push button.

$5.49
Each

Universal Gas Grill Control Knob.

P/N 02342

in-stock

Universal Knob. Selectable D Position, Socket Dia. (6mm Or 8mm), And Shaft Length (Flush, 0.25 Inch, Or 1.625�. Shatfs Can Also Be Trimmed To Desired Length). Includes Six Inserts (Shafts) And Set Screw. Fits Any Grill With Inside Bezel Dia. Greater Than 2.1875.

$10.49
Each

Cooking Grids & Other Parts

Sorry, we do not stock or sell cooking grids or any other parts for the Turbo/Barbecue Galore Grills. We only stock and sell the Turbo parts listed above.

Cooking Grids & Other Parts

Other
Parts

Everything we stock and sell for this brand is shown above. If you don't find what you need, suggest you try bbqgalore.com or barbecuesgalore.com, which we believe is the home website for the brand. We do not stock or sell any valves, orifices, hoses, or regulators for Turbo grills.

Other
Parts