Dynamic Cooking Systems (DCS) Grill Parts
Gas Grill Parts from BBQParts.com

All the parts we stock and sell for Dynamic Cooking Systems (DCS) gas grills are listed below. You can scroll down to review a listing of all the DCS parts we stock and sell and you can order directly from that list.

One Low Shipping Charge Per Order - Only $9.89 Per Order

Dynamic Cooking Systems Model List
We have collected a partial list of Dynamic Cooking System gas grill models and provide
below a list with a cross reference to the parts we stock and sell for those models.
Check with your model number for what we stock and sell.
 
For DCS gas grills we stock and sell: For DCS gas grills, we DO NOT stock or sell:
  • Stainless Steel Rod Cooking Grids
• Stainless Steel U-shaped Pipe Burner
• Cast Iron Burners
• Ceramic Radiant Rods
• Stainless Steel Heat Plates
• Stainless Smoker Tube Burner
• Stainless Wood Chip Smoker Tray
• Collector Box and Electrode
• Rotary Igniters with Knob
• Electronic Ignitor
  • Gas valves
• Cart parts
• Wheels
• Covers
• Rotisserie kits
• Rotisserie motors
 
Burners for Dynamic Cooking System Grills
We now stock and sell three popular burners for Dynamic Cooking System grills. Please choose the burner you need by illustration and size. Use the quantity selection box to order the number of burners you want. Thank you.
Parts
Description
Price
DCS Stainless Steel Tube Burner [Replaces OEM P/N 210617P] [DCSU1]
P/N 12171
in-stock
The high-quality, stainless-steel Burner WE ship for 12171/DCSU1 is MADE IN USA. New Lower Pricing. Same High Quality Burner. This is a stainless steel U-shaped pipe burner used in some models of DCS grills. Please match up from illustration and sizes. Burner comes with adjustable air shutter and screw. (DCSU1) This part replaces DCS OEM part number 210617P. $69.00
Each
Quantity:

DCS Stainless Steel Tube Burner [Replaces OEM P/N 210617P] [DCSU1] - 3 Pak
P/N 12171-3pak
in-stock
The high-quality, stainless-steel Burner WE ship for 12171/DCSU1 is MADE IN USA. New Lower Pricing. Same High Quality Burner. By ordering one three-pak here, you will receive three of the 12171 Stainless Steel Burners with special quantity pricing. This part replaces DCS OEM part number 210617P. These are stainless steel U-shaped pipe burners used in some models of DCS grills. Please match up from illustration and sizes. Burner comes with adjustable air shutter and screw. (DCSU1-3pak) This part replaces DCS OEM part number 210617P. $195.00
Set of 3
Quantity:

DCS Stainless Steel Tube Burner [Replaces OEM P/N 210617P] [DCSU1] - 5 Pak
P/N 12171-5pak
in-stock
The high-quality, stainless-steel Burner WE ship for 12171/DCSU1 is MADE IN USA. New Lower Pricing. Same High Quality Burner. By ordering one five-pak here, you will receive five of the 12171 Stainless Steel Burners with special quantity pricing. This part replaces DCS OEM part number 210617P. These are stainless steel U-shaped pipe burners used in some models of DCS grills. Please match up from illustration and sizes. Burner comes with adjustable air shutter and screw. (DCSU1-5pak) This part replaces DCS OEM part number 210617P. $299.00
Set of 5
Quantity:

Cast Iron Burner [Replaces OEM P/N 210348] [CIDCS-LG]
P/N 23601
in-stock
This is a cast iron burner used in some 36 inch and 48 inch models of DCS grills. Please match up from illustration and sizes. This burner replaces DCS part number 12012. 23601 Burner dimensions: 20 1/2 inches from end to end - from the end of the cast iron venturi assembly to the opposite, squared off end of the burner. Burner is 6 1/4 inches wide. Burner comes with adjustable air shutter and screw. (DCS-BBQ236) (CIDCS-LG) This part replaces DCS OEM part numbers 12012 and 210348. This burner replaces GE/MONOGRAM OEM part number WB28X10021.
PLEASE NOTE: Outstanding freight rate savings over other web sites - pay only $9.89 per order!
$94.99
Each
Quantity:
(Limit: 25 burners per order.)

DCS Cast Iron Burners - 3 Pak [Replaces OEM P/N 210348] [CIDCS-LG]
P/N 23601-3pak
in-stock
By ordering this three pack of 23601 burners, you will receive three 23601 cast iron burners These are cast iron burners used in some 36 inch and 48 inch models of DCS grills. Please match up from illustration and sizes. This burner replaces DCS part number 12012. 23601 Burner dimensions: 20 1/2 inches from end to end - from the end of the cast iron venturi assembly to the opposite, squared off end of the burner. Burner is 6 1/4 inches wide. Burner comes with adjustable air shutter and screw. (DCS-BBQ236) (CIDCS-LG) This part replaces DCS OEM part numbers 12012 and 210348. This burner replaces GE/MONOGRAM OEM part number WB28X10021.
PLEASE NOTE: Outstanding freight rate savings over other web sites - pay only $9.89 per order!
$284.97
for 3 Burners
Quantity:
(Limit: 25 burners per order.)

Cast Iron Burner [CIDCSLX]
P/N 22701
in-stock
This is a cast iron burner used in many 27, 36, and 48 inch DCS gas grills. Please match up from illustration and sizes. 22701 Burner dimensions: 16 inches from end to end - from the end of the cast iron venturi assembly to the opposite, squared off end of the burner. Burner is 6 1/4 inches wide. Burner comes with adjustable air shutter and screw. (CIDCSLX) This burner replaces GE/MONOGRAM OEM part number WB28X10025.
PLEASE NOTE: Outstanding freight rate savings over other web sites - pay only $9.89 per order!
$74.99
Each
Quantity:
(Limit: 25 burners per order.)

Cast Iron Burners - 2 Pak
P/N 22701-2pak
in-stock
By ordering this two pack of 22701 burners, you will receive two 22701 cast iron burners. These are cast iron burners used in many 27, 36, and 48 inch DCS gas grills. Please match up from illustration and sizes. 22701 Burner dimensions: 16 inches from end to end - from the end of the cast iron venturi assembly to the opposite, squared off end of the burner. Burner is 6 1/4 inches wide. Burner comes with adjustable air shutter and screw. (CIDCSLX-2pak) This burner replaces GE/MONOGRAM OEM part number WB28X10025.
NOTE - Our shipping charge for these burners is only $9.89 per ORDER.
$149.98
for 2 Burners
Quantity:
(Limit: 25 burners per order.)

Cast Iron Burners - 3 Pak
P/N 22701-3pak
in-stock
By ordering this three pack of 22701 burners, you will receive three 22701 cast iron burners. These are cast iron burners used in many 27, 36, and 48 inch DCS gas grills. Please match up from illustration and sizes. 22701 Burner dimensions: 16 inches from end to end - from the end of the cast iron venturi assembly to the opposite, squared off end of the burner. Burner is 6 1/4 inches wide. Burner comes with adjustable air shutter and screw. (CIDCSLX-3pak) This burner replaces GE/MONOGRAM OEM part number WB28X10025.
PLEASE NOTE: Outstanding freight rate savings over other web sites - pay only $9.89 per order!
$224.97
for 3 Burners
Quantity:
(Limit: 25 burners per order.)

 
DCS Cook Grids - 304 Stainless Steel - 5/16 Diameter Rod
We stock and sell cook grids for some models of Dynamic Cooking Systems grill. Please select from the illustration with dimensions below.
Parts
Description
Price
Stainless Steel ROD Cooking Grid for DCS Grills [Replaces OEM P/N 212408P]
P/N CG79SS4
in-stock
Made in the USA. This newly manufactured cook grid is made of 304 stainless steel rod that is 5/16 inches in diameter and designed and made specifically for Dynamic Cooking System gas grills. Each cook grid measures 10 7/16 by 20 1/2 inches. Sold individually. Please order the quantity you need. This CG79SS4 grid is notched on all four corners. This part replaces DCS OEM part number 212408P. This cook grid, CG79SS4, replaces GE/MONOGRAM OEM part number WB49X10013.
PLEASE NOTE: Outstanding freight rate savings over other web sites - pay only $9.89 per order!
$83.99
Each
Quantity:

Three Piece Cook Grid Set Made of Stainless Steel ROD for DCS Grills [Replaces OEM P/N 212408P]
P/N CG79SS4-3pak
in-stock
Made in the USA. This newly manufactured cook grid set is made of 304 stainless steel rod. Each grid is 5/16 inches in diameter and designed and made specifically for Dynamic Cooking System gas grills. Each cook grid measures 10 7/16 by 20 1/2 inches. Sold here as a set of 3. This CG79SS4 grid is notched on all four corners. This part replaces DCS OEM part number 212408P. This cook grid, CG79SS4, replaces GE/MONOGRAM OEM part number WB49X10013.
PLEASE NOTE: Outstanding freight rate savings over other web sites - pay only $9.89 per order!
$251.97
Set of 3
Quantity:

Stainless Steel ROD Cook Grid for DCS Grills [Replaces OEM P/N 212427P]
P/N CG80SS
in-stock
Made in the USA. This newly manufactured cook grid is made of 304 stainless steel rod that is 5/16 inches in diameter and designed and made specifically for Dynamic Cooking Systems gas grills. Each cook measures 12 3/4 inches by 19 1/2 inches. Sold individually. Please order the quantity you need. Replaces DCS OEM part number 212427P.
PLEASE NOTE: Outstanding freight rate savings over other web sites - pay only $9.89 per order!
$89.00
Each
Quantity:

Two Piece Cook Grid Set Made of Stainless Steel Rod.
P/N CG109SS-2
in-stock
This high quality stainless steel cook grid set is made of 5/16 inch thick stainless steel rod. Each cook grid measures 18 1/2 inches from front to back and 12 3/4 inches across of the front. The combined dimensions of the two grids side by side is 25 1/2 inches across the front and 18 1/2 inches front to back. The set is designed to replace two individual DCS original equipment porcelain coated cook grids that are part number 212425.
PLEASE NOTE: Outstanding freight rate savings over other web sites - pay only $9.89 per order!
$138.00
Set of 2
Quantity:

 
Heat Plate & Radiants for Dynamic Cooking System Grills
We stock and sell a heat plate and radiants for some models of Dynamic Cooking Systems grill. Please select from the illustration with dimensions below.
Parts
Description
Price
DCS Heat Plate [Replaces OEM P/N 212081P] [DCSHP3]
P/N 92911
in-stock
High Quality Stainless Steel. Stainless Steel plate to hold DCS ceramic radiant bars. The heat plate comes with nuts, bolts and the end cap strip that runs along the edge of the heat plate to hold the ceramic radiant bars in place. Each heat plate is grooved with cradles to hold 18 ceramic rods (6 three packs of 99123 rods). Replaces DCS OEM part number 212081P. (Rods are available to be purchased separately - they are not included with 92911 heat plate.) $66.00
Each
Quantity:

DCS Heat Plate - 3 Pak
P/N 92911-3pak
in-stock
High Quality Stainless Steel. By ordering this Three pack of 92911 heat plates, you will receive three 92911 stainless steel heat plates with special quantity pricing.
Three Stainless Steel plates to hold DCS ceramic radiant bars. These heat plates come with nuts, bolts and the end cap strips that runs along the edge of the heat plate to hold the ceramic radiant bars in place. Each heat plate is grooved with cradles to hold 18 ceramic rods (6 three packs of 99123 rods). Replaces DCS OEM part number 212081P. (Rods are available to be purchased separately - they are not included with 92911 heat plate.)
$189.00
Set of 3
Quantity:

DCS Heat Plate - 5 Pak
P/N 92911-5pak
in-stock
High Quality Stainless Steel. By ordering this Five pack of 92911 heat plates, you will receive Five 92911 stainless steel heat plates with special quantity pricing.
Five Stainless Steel plates to hold DCS ceramic radiant bars. These heat plates come with nuts, bolts and the end cap strips that runs along the edge of the heat plate to hold the ceramic radiant bars in place. Each heat plate is grooved with cradles to hold 18 ceramic rods (6 three packs of 99123 rods). Replaces DCS OEM part number 212081P. (Rods are available to be purchased separately - they are not included with 92911 heat plate.)
$295.00
Set of 5
Quantity:

Three [3] 9.5 inch Ceramic Rods for DCS Grills [DCSCT]
P/N DCSRods-3Pak
(99123)
in-stock
Made in the USA. These ceramic rods are made in the USA to match the quality, design, size, (length and diameter thickness) of original DCS rods and fit the 92911 heat plate. These ceramic radiant rods are sold for use with heat plate P/N 92911. By ordering here, you will receive three ceramic rods (3) that are 9 1/2 inches long. Each rod on this order will cost 3.99 each. To receive lower per rod pricing, pick from our larger quantity offerings that offer reduced prices per rod. (1x3) (99123) $11.97
By placing an order for quantity '1', you will receive three (3) ceramic rods that are 9 1/2 inches long.
Quantity:

Twelve [12] 9.5 inch Ceramic Rods for DCS Grills [DCSCT]
P/N DCSRods-12Pak
(99123)
in-stock
Made in the USA. These high quality, durable ceramic rods are made in the USA to match the quality, design, size, (length and diameter thickness) of original DCS rods and fit the 92911 heat plate. By ordering here, you will receive twelve (12) ceramic rods (each one is 9 1/2 inches long) at Special Quantity Pricing of 3.75 per rod. Eighteen (18) Ceramic Rods is the amount needed to fill one DCS Heat Plate P/N 92911. By ordering quantity of 2, you will receive 24 rods, and so forth. (4x3) (99123) (CRPK9 plus 3) $45.00
By placing an order for quantity '1', you will receive 12 ceramic rods that are 9 1/2 inches long.
Quantity:

Eighteen [18] 9.5 inch Ceramic Rods for DCS Grills [DCSCT]
P/N DCSRods-18Pak
(99123)
in-stock
Made in the USA. These high quality, durable ceramic rods are made in the USA to match the quality, design, size, (length and diameter thickness) of original DCS rods and fit the 92911 heat plate. By ordering here, you will receive Eighteen Ceramic Rods (each one is 9 1/2 inches long) at the Special Quantity Pricing of 3.50 per rod. Eighteen (18) Ceramic Rods is the amount needed to fill one DCS Heat Plate P/N 92911. By ordering quantity of 2, you will receive 36 rods, and so forth. (6x3) (99123)
$63.00
By placing an order for quantity '1' here, you will receive 18 ceramic rods that are 9 1/2 inches long.
Quantity:

Fifty-four [54] 9.5 inch Ceramic Rods for DCS Grills [DCSCT]
P/N DCSRods-54Pak
(99123)
in-stock
Made in the USA. These high quality, durable ceramic rods are made in the USA to match the quality, design, size, (length and diameter thickness) of original DCS rods and fit the 92911 heat plate. By ordering here, you will receive. Fifty-four Ceramic Rods (each one is 9 1/2 inches long) at Special Quantity Pricing of 3.00 per rod. 18 Ceramic Rods is the total number needed to fill one DCS Heat Plate P/N 92911. By ordering quantity of 2, you will receive 108 rods, and so forth. (18x3) (99123) $162.00
By placing an order for Quantity '1' here. you will receive 54 ceramic rods that are 9 1/2 inches long.
Quantity:

Seventy-two [72] 9.5 inch Ceramic Rods for DCS Grills [DCSCT]
P/N DCSRods-72Pak
(99123)
in-stock
Made in the USA. These high quality, durable ceramic rods are made in the USA to match the quality, design, size, (length and diameter thickness) of original DCS rods and fit the 92911 heat plate. By ordering here, you will receive Seventy-two Ceramic Rods (each one is 9 1/2 inches long) at Special Quantity Pricing of 3.00 per rod. Eighteen (18) Ceramic Rods is the amount needed to fill one DCS Heat Plate P/N 92911. By ordering quantity of 2, you will receive 144 rods, and so forth. (24x3) (99123) $216.00
By placing an order for quantity '1' here, you will receive 72 rods that are 9 1/2 inches long.
Quantity:

One Hundred Forty-Four [144] 9.5 inch Ceramic Rods for DCS Grills [DCSCT]
P/N DCSRods-144Pak
(99123)
in-stock
Made in the USA. These high quality, durable ceramic rods are made in the USA to match the quality, design, size, (length and diameter thickness) of original DCS rods and fit the 92911 heat plate. By ordering here, you will receive One Hundered Forty-Four (144) Ceramic Rods (each one is 9 1/2 inches long) at special. Quantity Pricing of 2.40 per rod. Eighteen (18) Ceramic Rods is the amount needed to fill one DCS Heat Plate P/N 92911. By ordering quantity of 2, you will receive 288 rods, and so forth. (48x3) (99123) $345.60
By placing an order for quantity '1' here, you will receive 144 ceramic rods that are 9 1/2 inches long.
Quantity:

 
Heat Plates for Dynamic Cooking System Grills
We now stock and sell the stainless steel heat plates for most popular models of Dynamic Cooking Systems (DCS) grills.

We stock and sell two sizes of DCS heat plates. The 10 5/8 inch by 19 inch size fits the DCS gas grills that are 24, 36, and 48 inches wide. The 10 1/2 inch by 16 1/2 inch size fits the DCS gas grill that is 27 inches wide. Order from the listing below.

Please confirm the size of the heat plates in your DCS model when ordering.

Parts
Description
Price
Heat Plates for the following DCS Models: 24 inch, 36 inch, 48 inch wide [Replaces OEM P/N 213949] [DCSHP1]
P/N 90361
in-stock
Stainless Steel Heat Plate. Dimensions - 9 9/16 by 19 inches. Sold Individually. Used in sets of 2, 3 or 4. This heat plate replaces DCS part number 30522. This heat plate fits many of the 24, 36, and 48 inch models. Please verify your selection by comparing to your DCS heat plate and checking measurements. (DCSHP1) This part replaces DCS OEM part number 213949. This heat plate replaces GE/MONOGRAM OEM part number WB02X10384. $58.99
Each
Quantity:

Heat Plate for DCS 27 inch model [Replaces OEM P/N 213948] [DCSHP2]
P/N 90271
in-stock
Stainless Steel Heat Plate. Dimensions 10 1/2 inches by 16 1/2 inches. Sold Individually. Used in sets of 2. This heat plate fits many of the 27 inch models. Please verify your selection by comparing to the heat plate in your DCS and verifying measurements. (DCSHP2) The part replaces DCS OEM part numbers 213948 and 30709-020. This heat plate replaces GE/MONOGRAM OEM part number WB02X10434. $39.00
Each
Quantity:

 
Ceramic Briquettes for Dynamic Cooking System Grills
Parts
Description
Price
USA-MADE Square Ceramic Briquettes. 28 Briquettes per box.
P/N BBQLYX-USA
in-stock
These high-quality, Made in the USA, briquettes are manufactured for us by the leading manufacturer/supplier to a number of high quality, American made brands of gas grills. They fit and work for heat plates in Lynx, Dynasty, and Alfresco gas grills. Can be used in other brands as well. They are a light brown, earth tone color (same as ones used in high end, USA grills) and the same size as the white replacement briquettes sold on the internet. The briquettes are well packaged, in individual boxes of 28 briquettes. They are NOT shipped in bags. The briquettes measure 2 inches square and are 3/4 inch tall. The four sides meet at a flat top - like a cut off pyramid. On the bottom, there is a round recess, approximately 1 inch in diameter, to capture and transfer heat better. We are able to offer these at very reasonable pricing because of our quantity buying. By ordering one box, you will receive one box of 28 briquettes. Order the box quantity you need. The number of briquettes you need depends on the size of the heat plate, and the number of heat plates in your grill. We suggest you count before ordering to get enough. (28 briquettes per box). Highly recommended. (not 41648)
PLEASE NOTE: Outstanding freight rate savings over other web sites - pay only $9.89 per order!
$32.00
Box of 28 briquettes
Quantity:

 
Warming Racks
Parts
Description
Price
DCS Aftermarket Small BBQ Warming Rack [Replaces DCS OEM Part 212921]
P/N D2NNM
in-stock
This high-quality warming rack is constructed and made of 304 Stainless Steel Rod. Measures 24 inches by 16 inches. It replaces DCS OEM Warming Rack Part 212921 and is made for Model BGA-26BQNM. $67.99
Each
Quantity:

Dynamic Cooking Systems [DCS] Replacement Stainless Steel Warming Rack. [Replaces DCS OEM Part 214030]
P/N D2S2J
in-stock
This high-quality replacement warming rack is made of 304 Stainless Steel Rod. The warming rack dimensions are 31” x 7 3/4” This replacement fits the following DCS models BGA36-BQAR, BGA36-BQARL, BGA36-BQARN, BGB36-BQAR, BGB36-BQARN, BGB48-BQARN, BGB48-BQRN, DCS36-BQARN, DCS36D-BQARN, DCS36D-BQARN, DCS36E-BQARN, DCS48-BQRN, DCS48D-BQAN, DCS48D-BQARN, DCS48D-BQRN, DCS48E-BQRN, DCS48E-BQRL, DCS48DS-BQA, DCS48DS-BQAR. (214030) $84.99
Each
Quantity:

 
Smoker Burner and Smoke Chip Accessory
Parts
Description
Price
DCS Stainless steel Smoker tube Burner [Replaces OEM P/N 213467] [DCST1]
P/N 12181
in-stock
This stainless steel tube burner is used for the smoker in a number of Dynamic Cooking System grills. The burner measures 18 inches long by one inch in diameter. When ordering and installing, check carefully that it matches the original burner in your grill. (MHP-DCST1) This smoker burner replaces GE/MONOGRAM OEM part numbers WB28X10103 and WB28X10007. This smoker burner replaces DCS OEM part number 213467. (DCST1) $21.25
Each
Quantity:

DCS Wood Chip Smoker Tray [DCSCHIP]
P/N 214331-AM
in-stock
This stainless steel wood chip tray measures 21 inches long and 2 and 1/2 inches wide. There is a curled lip at the end of the tray. This is an aftermarket replacement tray made of high quality stainless steel. (DCSCHIP) $45.00
Each
Quantity:

Igniter Components And Parts
Parts
Description
Price
DCS Collector Box and Electrode [04850] [IG33B]
P/N BBQ/DCS-485
in-stock
This replacement stainless steel collector box, electrode, and wire for Dynamic Cooking Systems gas grills is sold as one assembly. The length of the wire from the collector box to the tip of connector is 30 inches. Please note - for the connecting end of the igniter wire, we provide two options - we include a short adapter so you will have either a flat end or round end - whichever you need. (IG-33B, 04850) $10.89
Each
Quantity:

Electrode, Bracket, and Wire Assembly [IG37B]
P/N 06020
Sorry, we are temporarily out of stock of this part until next season - April 15, 2024.
Please check back.

This electrode, bracket and wire assembly is found in number of grill brands, primarily DCS. The assembly is not used in all DCS models. Please choose carefully. The wire is 15 inches long and is attached to the electrode which is mounted under the bracket. Electrode tip extends into the collector box. Bracket measures 3 inches long and one inch wide. Please note: The connector end of this wire that connects to the igniter is ROUND (Not flat). (IG37B)
8.79
Spark Generator and Push Button [Replaces OEM P/N 212334P] [IGEIB12B]
P/N 03360
in-stock
This electronic spark generator and push button assembly has 9V battery terminals mounted on the side. There are six output terminals. There are two input terminals for push button on the back. This is a replacement part for DCS OEM part number 212334P. (IGEIB12B) $34.50
Each
Quantity:

Electronic Igniter[Replaces OEM P/N 212333P] [IGEIB14B]
P/N 03370
in-stock
This 9 volt spark generator with 2 or 4 outlet option and push button switch is used mainly in some DCS gas grills. This is a replacement part for DCS OEM part number 212333P. (IGEIB14B) $32.50
Each
Quantity:

Igniter Push Button [Push button only]
P/N IGEIB18PB
in-stock
This is an igniter push button (PUSH BUTTON ONLY) for use with two igniter modules we stock and sell: IGEIB12B and IGEIB14B. The push button is used to trigger battery module to spark electrodes connected to it. $14.99
Each
Quantity:

Rotary Igniter With Knob, One Outlet [UP-5B]
P/N 03200
in-stock
This one outlet, rotary igniter is shipped with the knob included. (UP-5B). $9.89
Each
Quantity:

Rotary Igniter With Knob, Two Outlets [UP-6B]
P/N 03220
in-stock
This TWO outlet rotary igniter is shipped with knob included. (UP-6B). $12.89
Each
Quantity:

Rotary Igniter Knob
P/N GGK9
in-stock
This is the replacement Knob only that is used on rotary igniters, igniters that are manually turned by hand to produce a spark. The Knob is 1 and 3/4 inches in diameter. Directional arrows are molded in the plastic facing of the Knob. (20182601, 20173101) $3.95
Each
Quantity:

Adapter wire
P/N 03198
in-stock
This 2 3/4 inch long adapter wire has two different end fittings. One end is female round and the other end is male flat spade end. $3.49
Each
Quantity:

Wire [IG30B]
P/N 03610
in-stock
47 inch Wire With Female Spade And Square Plastic Connectors, Used With Battery Powered Spark Generators. (IG30B) $5.50
Each
Quantity:

20 inch Igniter Adapter Wire
P/N 03750
in-stock
This 20 inch long igniter adapter wire has a different connector style on each end. One end has a male round connector and the other end has a female flat spade connector. Order the quantity you need. $2.50
Each
Quantity:

20 inch Wire
P/N IG7B
in-stock
This replacement 20 inch insulated wire is for use with most rotary and push button igniter systems. One end has a female spade connector and the other end has a female round connector.
$4.89
Each
Quantity:

20 inch Igniter Wire with Two Female Flat Spade Ends
P/N IG18B
in-stock
20 inch igniter wire with 2 female flat spade connector ends. $3.89
Each
Quantity:

Electrode and Wire Assembly
P/N IG19B
in-stock
This assembly is an electrode with an 23 1/2 inch wire with a wire insulating jacket. One end of the wire is the electrode end and the other end is a flat spade connector. The ceramic portion of the electrode is 3 and 3/4 inches long. Electrode tip is 1 and 7/8 inches long - to where it takes a 90 degree bend (as shown in the illustration.
$8.79
Each
Quantity:

Left Side Collector Box and Electrode [Replaces OEM P/N 214269 and WB02X10660]
P/N IG39B
in-stock
This is a 'left' side collector box and electrode with an attached 15 inch molded wire. Fits some older Dynamic Cooking System models and some GE/Monogram models. Refer to OEM part numbers at end of this description. The assembly has a collector box for the 'left Side' with a 90 degree bend electrode tip that has a 2 1/2 long ceramic insulator and a 15 inch molded in wire that ends with a round connector fitting. Replaces DCS OEM part number 214269 and GE/Monogram OEM part number WB02X10660. Choose carefully. $27.75
Each
Quantity:

Right Side Collector Box and Electrode [Replaces OEM P/N 214268 and WB02X10659]
P/N IG40B
in-stock
This is a 'right' side collector box and electrode with an attached 15 inch molded wire. Fits some older Dynamic Cooking System models that require a left and right side collector box and some GE/Monogram models. Refer to OEM part numbers at end of this description. The assembly has a collector box for the 'right Side' with a 90 degree bend electrode tip that has a 2 1/2 long ceramic insulator and a 15 inch molded in wire that ends with a round connector fitting. Replaces DCS OEM part number 214268 and GE/Monogram OEM part number WB02X10659. Choose carefully.

$27.75
Each
Quantity:

19 inch Long Connector Wire for Viking Electrode
P/N IG43B
in-stock
This 19 inch long wire has flat female spade connection terminals at each end. One terminal is 1/4 inch and the other terminal is 1/8 inch. This wire is designed to connect the Viking igniter electrode to the spark generator. Does not includes the igniter electrode or the spark generator. $5.99
Each
Quantity:

Universal Control Knob
Universal Gas Grill Control Knob.
P/N 02342
in-stock
Universal Knob. Selectable D Position, Socket Dia. (6mm Or 8mm), And Shaft Length (Flush, 0.25 Inch, Or 1.625”. Shatfs Can Also Be Trimmed To Desired Length). Includes Six Inserts (Shafts) And Set Screw. Fits Any Grill With Inside Bezel Dia. Greater Than 2.1875. $10.49
Each
Quantity:

Parts
Description
Price
 
Accessories, Grill Covers, And Rotisserie Kits
Sorry, we do not stock or sell any accessories, rotisserie kits, or grill covers for Dynamic Cooking Systems (DCS) grills.

One Low Shipping Charge Per Order - Only $9.89 Per Order

 

 

 

 

Grill Parts Specialists for Charbroil, Sunbeam, Thermos, Charmglow, Weber, Ducane and Broilmaster Parts.
 

Answers and Click Throughs to Frequently Asked Questions

What We Sell:  We sell the popular replacement parts for the brands of gas grills listed on our website. All the parts we sell are shown or listed on our website. The parts carry a one year warranty.  We have no other parts to add to orders and no other parts available for sale. We offer shopping cart ordering - either by model number, by part number, or by descriptive, illustrated list of parts.  Because of our low prices, and low shipping charge per order, we reserve the right to limit quantities ordered.
How To Order:  All orders are placed through our website: bbqparts.com.  Please use our online brand shopping carts for efficient order processing.  To maintain accounting and shipping accuracy, we do not combine orders or change quantities or change parts ordered after the shopping cart is closed out.  If you need to change or cancel, let us know as soon as possible and we will do out best to catch the order before shipping.
How To Contact Us:  Sorry, we do not offer phone service.  We find we can offer better and more informed customer service by responding to email questions and queries.  Click here to go to our customer inquiry form.  If you need to report damaged or missing parts, please click here for that report form.  Thank you.
How To Pay: Orders can be charged to Visa, MasterCard, or Discover. Sorry, we do not accept American Express, money orders, or checks.  Sorry, we do not accept PayPal.
Where We Ship: We only ship to 48 of the United States, the states sometimes referred to as the "lower 48." All orders are shipped via United Parcel Service ground service.
How We Ship:  There is one low, flat rate shipping charge per order - $9.89 per order.  We only ship to the lower 48 United States and only via UPS ground service.  We need a street address for the shipping address.  No PO Boxes.  Sorry, we are unable to combine orders nor can we add to orders after the shopping cart is charged and closed out.  Sorry, we do not offer customer pick up or returns at our warehouse.  We usually ship within two business days of the receipt of order.
Where We Are:  Our shipping and warehouse location is in St. Petersburg, Fl.  All parts orders are shipped from St. Petersburg, Fl.  We do not have a retail store.   And, sorry, we do not offer customer pick up or returns at our warehouse.
Shipment Inquiry
& Report Form
  Customer
Inquiry Form
  Shipping and
Processing Times
  Returns
Policy
  Privacy
Policy
To Send Order Inquiry, Click Here: Orders@bbqparts.com
 

Back to the Home Page


Copyright © 1997-2024, BBQPARTS.com. All right reserved. Propane and natural gas are explosive and dangerous. We urge all consumers to be careful when using and repairing their gas grill. Do not use unsafe grills. Grills should be used according to manufacturer's specifications. The owner's manual often provides a good troubleshooting guide. If you have concerns about the repair of your gas grill, we urge you to contact a local gas appliance service company or the local gas company in your area. Also, grill manufacturers have customer service help lines to assist consumers.