|
Popular Cast Iron
and Brass Burners,
and Flame Tamers for Charbroil Stainless Steel Grills.
Gas Grill Parts from BBQParts.com
| |
Since approximately the year 2000, Charbroil has
been featuring and selling imported Stainless Steel Grill Models.
These stainless steel grill models are mostly sold through national
chains such as Home Depot, Lowes, Wal-Mart, Costco, and others.
We now stock and sell burners, flame tamers, and heat tents for most
of these models. If you have either the model number of your grill
or the part number you wish to purchase, we suggest you put that
information in our look up boxes for model number or part number at
the bottom of this page. This is the most reliable way to order the
correct parts for your grill. If you do not have that information,
we have a listing below of the most popular flame tamers and
burners.
For your convenience, we have provided below illustrations,
measurements, and descriptions of the most popular burners and flame
tamers found in the imported Charbroil grills. Please keep in mind
that this is not a complete list of all the burners and flame tamers
we stock and sell. If you don't see your part below, please look it
up by model number or part number using the look up boxes at the end
of this page. |
| Part Number |
Popular Cast Iron and Brass Burners |
Price |
Cast Iron Burner [CIDCH] [24901]
80001449
in-stock
|
 For this Charbroil burner, we offer an exact-fit, cast iron replacement burner. This rectangular-shaped burner is one piece with the cast iron venturi as part of the burner and extending beyond the burner body. The total length of the burner from the front edge to end of the cast iron venturi is 13 and 13/16 inches. The rectangular body of the burner has a width of 2 1/4 inches. Select the quantity you wish to order. (CIDCH, 80010062) (24901)
|
$18.15
Each
|
Cast Iron Burner [CIDCH] [80001449]
80000023
in-stock
|
For this Charbroil burner, we offer an exact-fit, cast iron replacement burner. This rectangular-shaped burner is one piece with the cast iron venturi as part of the burner and extending beyond the burner body. The total length of the burner from the front edge to end of the cast iron venturi is 13 and 13/16 inches. The width of the rectangular body of the burner is 2 1/4 inches. Select the quantity you wish to order. (CIDCH, 80010062) (24901) (80001449)
|
$18.15
Each
|
Cast Iron Burners [CIDCH] [80001449] - 3 Pak
24901-3pak
in-stock
|
 Reduced Quantity Pricing. By ordering this three pack of 24901 cast iron burners, you will receive three cast iron burners with special quantity pricing. Three exact-fit, cast iron replacement burners. Each of these rectangular-shaped burners are one piece with the cast iron venturi as part of the burner and extending beyond the burner body. The total length of each burner from the front edge to end of the cast iron venturi is 13 and 13/16 inches. The width of the rectangular body of each burner is 2 1/4 inches. (CIDCH-3pak, 80010062-3pak) (24901-3pak) (80001449-3pak)
|
$49.47
for 3 Burners
|
Cast Iron Burners [CIDCH] [80001449] - 4 Pak
24901-4pak
in-stock
|
 Reduced Quantity Pricing. By ordering this four pack of 24901 cast iron burners, you will receive four cast iron burners with special quantity pricing. Four exact-fit, cast iron replacement burners. Each of these rectangular-shaped burners are one piece with the cast iron venturi as part of the burner and extending beyond the burner body. The total length of each burner from the front edge to end of the cast iron venturi is 13 and 13/16 inches. The width of the rectangular body of each burner is 2 1/4 inches. (CIDCH-4pak, 80010062-4pak) (24901-4pak) (80001449-4pak)
|
$65.96
for 4 Burners
|
Cast Iron Burners [CIDCH] [80001449] - 5 Pak
24901-5pak
in-stock
|
 Reduced Quantity Pricing. By ordering this five pack of 24901 cast iron burners, you will receive five cast iron burners with special quantity pricing. Five exact-fit, cast iron replacement burners. Each of these rectangular-shaped burners are one piece with the cast iron venturi as part of the burner and extending beyond the burner body. The total length of each burner from the front edge to end of the cast iron venturi is 13 and 13/16 inches. The width of the rectangular body of each burner is 2 1/4 inches. (CIDCH-5pak, 80010062-5pak) (24901-5pak) (80001449-5pak)
|
$82.35
for 5 Burners
|
Charbroil Cast Iron Burner CB Part Numbers P02001032E and
P2056A
in-stock
|
 While Supplies Last.
Many of the Charbroil Stainless Steel grills since the year 2000 have used this burner. We stock and sell this black, cast iron burner for Charbroil gas grill models. Charbroil sells it under two part numbers: P2056A and P02001032E. Burner is 15 inches long from the the tip to the end of the venturi tube and 3 1/2 inches wide. There is a long, rounded, rectangular opening in the center of the burner. (20561).
|
$15.89
Each
|
Charbroil Cast Brass Burner
80003051
|
 The Charbroil Brass Burner 80003051 was used in few Charbroil stainless steel grills since 2000. The retail price of this burner has now risen to 69.00. Unfortunately, we have decided not to stock or sell this because there is a less expensive, exact-fit, exact-size, black cast iron replacement burner for $14.25. Most customers are buying the black cast iron substitute. You can order by clicking here or going to part number P2056A. If you still want the brass burner, we believe Charbroil has it, try them. Sorry for any inconvenience.
|
|
Charbroil Cast Brass Burner
80000349
Subs to Black Cast Iron [24901] [CIDCH] 80001449
in-stock
|
We have discontinued offering the expensive cast brass burner, 80000349, and now sub the brass burner to less expensive, exact-fit alternative - a black cast iron burner - part number 80001449. The less expensive black cast iron is an exact-fit replacement - rectangular-shaped burner with cast iron body and venturi that is 13 and 13/16 inches long. The width of the burner is 2 1/4 inches. By placing an order here, you will receive the black cast iron burner. (24901, CIDCH, 80010062)
|
Black Cast Iron Burner
$18.15
Each
|
Cast Iron Burner [CIJA]
26301
|
 We are now sold out of this part and we have discontinued selling it. You may find it on other internet websites.
This cast iron burner is used in many gas grill models - primarily featured in Jenn-Air models. Each burner is 15 13/16 inches long and 2 3/16 inches wide. The burner design is distinguished by the angled top which is approximately 13 1/2 inches long. (CIJA)
|
|
Charbroil Burner
7000083
Now Ships as Cast Iron Paddle Burner - 7000039
in-stock
|
 Charbroil has discontinued the stainless steel version of the paddle shaped burner (PN7000083) and replaces it with an exact fit cast iron substitute - same shape, design, and size. We now sell the same Charbroil cast iron substitute. Measurements are approximately 13 3/4 inches front to back (including the cast iron venturi tube) and 3 1/2 inches wide. The burner is made as one piece cast iron. This cast iron burner we sell is a replacement for stainless steel version of the same burner sometimes sold as part number 14631. (7000039)
|
$15.89
Each
|
Charbroil Cast Iron Paddle Burner
7000039
in-stock
|
 Cast Iron Burner. Measurements are approximately 13 3/4 inches front to back (including the cast iron venturi tube) and 3 1/2 inches wide. The burner is made as one piece cast iron. This cast iron burner we sell is a replacement for stainless steel version of the same burner sometimes sold as part number 14631. (7000083)
|
$15.89
Each
|
Charbroil Cast Iron Paddle Burner - 3 pak
7000039-3pak
in-stock
|
 Reduced Quantity Pricing. By ordering here, you will receive a three-pak of 7000039 cast iron burners with special quantity pricing. Cast Iron Burner. Measurements are approximately 13 3/4 inches front to back (including the cast iron venturi tube) and 3 1/2 inches wide. The burner is made as one piece cast iron. This cast iron burner we sell is a replacement for stainless steel version of the same burner sometimes sold as part number 14631. (7000083)
|
$44.97
for 3 Burners
|
| Burner Support Rails |
Sorry, we do not stock or sell burner support rails. |
|
| Burner Crossover Tubes |
Sorry, we do not stock or sell burner crossover tubes. |
|
| Part Number |
Popular Stainless Steel Burners |
Price |
Charbroil Stainless Steel Burner
80000606
|
 Sorry, we do not stock or sell this burner.
Main Stainless Steel Burner. WPG, 04. Most Charbroil Models Take 3 burners. Order the quantity you need. (G405-0200-01)
|
|
Stainless Steel Tube Burner
80005591
(CBP2)
(15591)
in-stock
|
 While Supplies Last. Stainless Steal Tube burner. 15 7/8 inches long. (15591, CBP2, 80005591, 80005703, 80006502, G505-1100-01, G504-0900-01, 80013421)
|
$7.99
Each
|
Stainless Steel Tube Burner
80005641
(CBP3)
(15641)
|
 Sorry, we do not stock or sell this burner.
Charbroil Stainless Steel Tube Burner with spider guards. (80016864, 15641, CBP3).
|
|
Stainless Steel Tube Burner
80005703
(CBP2)
(15591)
in-stock
|
While Supplies Last. Stainless Steal Tube burner. 15 7/8 inches long. (15591, CBP2, 80005591, 80005703, 80006502, G505-1100-01, G504-0900-01, 80013421)
|
$7.99
Each
|
Stainless Steel Tube Burner
80006502
(CBP2)
(15591)
in-stock
|
While Supplies Last. Stainless Steal Tube burner. 15 7/8 inches long. (15591, CBP2, 80005591, 80005703, 80006502, G505-1100-01, G504-0900-01, 80013421)
|
$7.99
Each
|
Stainless Steel Tube Burner
80009027
(CBP4)
|
 Sorry, we no longer stock or sell this part. You may find it available on other websites.
Charbroil Stainless Steel Tube Burner. Sold Individually. Order the quantity you need. (G431-0300-W1, CBP4)
|
|
Stainless Steel Tube Burner
80013421
(CBP2)
(15591)
in-stock
|
While Supplies Last. Stainless Steal Tube burner. 15 7/8 inches long. (15591, CBP2, 80005591, 80005703, 80006502, G505-1100-01, G504-0900-01, 80013421)
|
$7.99
Each
|
Stainless Steel Tube Burner
80016864
(CBP3)
(15641)
|
Sorry, we do not stock or sell this burner.
Charbroil Stainless Steel Tube Burner with spider guards. (80005641, 15641, CBP3)
|
|
Stainless Steel Tube Burner
80018369
(CBP6)
(15491)
|
 Sorry, we no longer stock or sell this part. You may find it available on other websites.
This stainless steel burner measures 14 3/8 inches long. It is one inch in diameter. Please order the quantity you need. (CBP6, 15491, G431-0300-W2, 80018369, G430-3800-w1)
|
|
Charbroil Stainless Steel Burner
G405-0200-01
|
Sorry, we do not stock or sell this burner.
Main Stainless Steel Burner. WPG, 04. Most Charbroil Models Take 3 burners. Order the quantity you need. (G405-0200-01 80000606)(Sub?800000606)
|
|
Stainless Steel Tube Burner
G430-3800-W1
(CBP6)
(15491)
|
Sorry, we no longer stock or sell this part. You may find it available on other websites.
This stainless steel burner measures 14 3/8 inches long. It is one inch in diameter. Please order the quantity you need. (CBP6, 15491, G431-0300-W2, 80018369, G430-3800-w1)
|
|
Stainless Steel Tube Burner
G431-0300-W1
(CBP4)
|
Sorry, we no longer stock or sell this part. You may find it available on other websites.
Charbroil Stainless Steel Tube Burner. Sold Individually. Order the quantity you need. (80009027, CBP4)
|
|
Stainless Steel Tube Burner
G431-0300-W2
(CBP6)
(15491)
|
Sorry, we no longer stock or sell this part. You may find it available on other websites.
This stainless steel burner measures 14 3/8 inches long. It is one inch in diameter. Please order the quantity you need. (CBP6, 15491, G431-0300-W2, 80018369, G430-3800-w1)
|
|
Stainless Steel Tube Burner
G504-0900-01
(CBP2)
(15591)
in-stock
|
While Supplies Last. Stainless Steal Tube burner. 15 7/8 inches long. (15591, CBP2, 80005591, 80005703, 80006502, G505-1100-01, G504-0900-01, 80013421)
|
$7.99
Each
|
Stainless Steel Tube Burner
G505-1100-01
(CBP2)
(15591)
in-stock
|
While Supplies Last. Stainless Steal Tube burner. 15 7/8 inches long. (15591, CBP2, 80005591, 80005703, 80006502, G505-1100-01, G504-0900-01, 80013421)
|
$7.99
Each
|
| Burner Support Rails |
Sorry, we do not stock or sell burner support rails. |
|
| Burner Crossover Tubes |
Sorry, we do not stock or sell burner crossover tubes. |
|
| Part Number |
Popular Flame Tamers |
Price |
SUPPORT
4151014
in-stock
|
 This is the support frame that sits over the burner and holds the burner tent above the burner. Depending on your Big Easy Model, your grill takes two or three frames. Please use our quantity selection to order the amount you want. (To make a set 92261 heat tent and support, place order for 1 - 4151014 and 1 - 4500226)
|
$10.49
Each
|
Charbroil Square (6 by 6 inches) Stainless Steel Heat Tent
4500226
in-stock
|
 This is the burner tent only. Sets on top of support tent frame that is offered below. Depending on your Big Easy model, your grill takes two or three tents. Please use our quantity selection to order the amount you want. (To make a set 92261 heat tent and support, place order for 1 - 4151014 and 1 - 4500226)
|
$9.49
Each
|
Charbroil Stainless Steel Vaporizer Tent (5 3/4 by 11 3/4 inches)
7000381
in-stock
|
 Limited Quantity Available. While Supplies Last. Vaporizer Tent. V-shaped, drip vaporizer shield with vents cut into both sides of the slope. Stainless Steel. Measures 11 3/4 inches long and 5 3/4 inches wide. Sold individually. This part is sold on some websites as P/N 94631 in a porcelain coated steel version - our part is stainless steel. Order the quantity you need for your grill. Usually one per burner. (7000044, 7000045)
|
$9.89
Each
|
Charbroil Stainless Steel Vaporizer Tents - 3 Pak
7000381-3pak
in-stock
|
 Limited Quantity Available. While Supplies Last. Reduced Quantity Pricing. By ordering this three pack of 7000381 stainless steel heat plates, you will receive three stainless steel heat plates with special quantity pricing. Three Vaporizer Tents. Each Heat Tent is a V-shaped, drip vaporizer shield with vents cut into both sides of the slope. Stainless Steel. Each tent measures 11 3/4 inches long and 5 3/4 inches wide. This part is sold on some websites as P/N 94631 in a porcelain coated steel version - our part is stainless steel. (7000044-3pak, 7000045-3pak)
|
$29.67
for 3 Heat Tents
|
Charbroil Stainless Steel Vaporizer Tents - 4 Pak
7000381-4pak
in-stock
|
 Limited Quantity Available. While Supplies Last. Reduced Quantity Pricing. By ordering this four pack of 7000381 stainless steel heat plates, you will receive four stainless steel heat plates with special quantity pricing. Four Vaporizer Tents. Each Heat Tent is a V-shaped, drip vaporizer shield with vents cut into both sides of the slope. Stainless Steel. Each tent measures 11 3/4 inches long and 5 3/4 inches wide. This part is sold on some websites as P/N 94631 in a porcelain coated steel version - our part is stainless steel. (7000044-4pak, 7000045-4pak, 7000381-4pak)
|
$39.56
for 4 Heat Plates
|
Charbroil Stainless Steel Vaporizer Tents - 5 Pak
7000381-5pak
in-stock
|
 Limited Quantity Available. While Supplies Last. Reduced Quantity Pricing. By ordering this five pack of 7000381 stainless steel heat plates, you will receive five stainless steel heat plates with special quantity pricing. Five Vaporizer Tents. Each Heat Tent is a V-shaped, drip vaporizer shield with vents cut into both sides of the slope. Stainless Steel. Each tent measures 11 3/4 inches long and 5 3/4 inches wide. This part is sold on some websites as P/N 94631 in a porcelain coated steel version - our part is stainless steel. (7000044-5pak, 7000045-5pak, 7000381-5pak)
|
$49.45
for 5 Heat Plates
|
Stainless Steel Heat Plate [CBHP4]
80000273
in-stock
|
 FLAME TAMER. Stainless Steel Heat Plate. This stainless steel heat plate measures 4 3/16 inches by 15 inches. 3B, SST 430, WPG, 04 (80000855) (94011) (CBHP4-AM)
|
$14.95
Each
|
Stainless Steel Heat Plate [CBHP4]
80000855
in-stock
|
FLAME TAMER. Stainless Steel Heat Plate. This stainless steel heat plate measures 4 3/16 inches by 15 inches. 3B, SST 430, WPG, 04 (80000855) (94011) (CBHP4-AM, 80000273)
|
$14.95
Each
|
Porcelain Coated Steel Flame Tamer
80003394
|
 We are sold out of porcelain coated heat plate. Use CBHP3 stainless heat plate.
Porcelain Coated Steel Flame Tamer. This heat plate measures 17 inches by 3 3/4 inches. (93941)
|
|
Porcelain Coated Steel Heat Plate
80008074
|
 Sorry, we are sold out and cannot supply.
Charbroil Porcelain Coated Steel Heat Plate. Sold individually. Please order the quantity you need. (Alt/SS/CBHP5) (SHIP G433-0016-W1)
|
|
Heat Tent
80008387
in-stock
|
 While supplies last.
This Charbroil factory flame tamer is made of steel and is covered with porcelain enamel coating. Dimensions are 6 1/8 inches by 16 7/8 inches. The flame tamer has vent openings to allow heat to pass through from the burner and is sloped away from the middle so grease drips away from the burner. (G208-0029-W1)
|
$7.99
Each
|
Stainless Steel Heat Plate [CBHP4]
94011
in-stock
|
FLAME TAMER. Stainless Steel Heat Plate. This stainless steel heat plate measures 4 3/16 inches by 15 inches. 3B, SST 430, WPG, 04 (80000855, 80000273) (94011) (CBHP4-AM)
|
$14.95
Each
|
Stainless Steel Heat Plate
98741-SS
in-stock
|
 This stainless steel heat plate measures 14 5/8 inches by 4 5/16 inches. It can be ordered as an upgrade to the porcelain steel heat plate of the same dimensions. Order the quantity you need. (98741-SS/CBHP5)
|
$7.99
Each
|
Porcelain Coated Steel Heat Plate
G433-0016-W1
|
Sorry, we are sold out and cannot supply.
Charbroil Porcelain Coated Steel Heat Plate. Sold individually. Please order the quantity you need. (Alt/SS/CBHP5) (80008074)
|
|
Porcelain Coated Heat Plate
G501-0008-W1
in-stock
|
 Charbroil original equipment porcelain coated steel heat plate. 16 inches long by 3.8 inches wide. (G501-0026-01)
|
$7.99
Each
|
Flame Tamer [97441]
P1744A
|
 Sorry, we no longer stock or sell this part. You may find it available on other websites.
Charbroil now uses a new part number (P01705005E) for this P1744A flame tamer. But the new part is identical to the old part - just a different factory part number. This flame tamer is made of steel covered with a porcelain enamel coating. Dimensions are 7 9/16 inches by 17 1/16 inches. It has louvered vents to allow heat to come through and is sloped to allow grease to drip away from the burner. This flame tamer is positioned over the burner. Order the quantity needed for your grill. Usually one per burner. (New Charbroil factory part number P01705005E, 97441, CBHP9) 24.50
|
|
Flame Tamer [97441]
P01705005E
|
Sorry, we no longer stock or sell this part. You may find it available on other websites.
This Charbroil factory flame tamer is made of steel which is covered with a porcelain enamel coating. Dimensions are 7 9/16 inches by 17 1/16 inches. The flame tamer has louvered vents to allow heat to come through and is sloped so grease drips away from the burner. The flame tamer is positioned over the burner. Order the quantity needed for your grill. Usually one per burner. (Replaces old Charbroil factory part number P1744A, 97441, CBHP9)24.50
|
|
|
Order Here By
Charbroil Part Number |
|
|
|
|
|
|
Order Here by Charbroil
Model Number |
|
If you
know your Charbroil Grill Model Number, enter it in the box
below for a parts list with prices of the parts we stock and sell. |
|
|
|
|
Answers and Click Throughs
to Frequently Asked Questions |
|
What We Sell: We sell
the popular replacement parts for the
brands of gas
grills listed on our website. All the parts we sell are
shown or listed on our website. The parts carry a one year
warranty. We have no other parts to add to orders and no other
parts available for sale. We offer shopping cart ordering -
either by model number, by part number, or by descriptive,
illustrated list of parts. Because of our low prices, and low
shipping charge per order, we reserve the right to limit
quantities ordered. |
|
How To Order: All
orders are placed through our website: bbqparts.com.
Please use our online brand shopping carts for efficient order
processing. To maintain accounting and shipping accuracy,
we do not combine orders or change quantities or change parts
ordered after the shopping cart is closed out. If you need
to change or cancel, let us know as soon as possible and we will
do out best to catch the order before shipping. |
|
How To Contact Us:
Sorry, we do not offer phone service. We find we can offer
better and more informed customer service by responding to email
questions and queries.
Click here to
go to our customer inquiry form. If you need to report
damaged or missing parts, please
click here for
that report form. Thank you. |
|
How To Pay: Orders can be
charged to Visa, MasterCard, or Discover. Sorry, we do not
accept American Express, money orders, or checks. Sorry,
we do not accept PayPal. |
|
Where We Ship: We
only ship to 48 of the United States, the states sometimes
referred to as the "lower 48." All orders are shipped via United
Parcel Service ground service. |
|
How We Ship:
There is one low, flat rate shipping charge per order - $9.89
per order.
We only ship to the lower 48 United States and only via UPS
ground service. We need a street address for the shipping
address. No PO Boxes. Sorry, we are unable to
combine orders nor can we add to orders after the shopping cart
is charged and closed out. Sorry, we do not offer customer
pick up or returns at our warehouse. We usually
ship within two business days of the receipt of order. |
|
Where We Are: Our
shipping and warehouse location is in St. Petersburg, Fl. All
parts orders are shipped from St. Petersburg, Fl. We do not
have a retail store. And, sorry, we do not offer customer pick
up or returns at our warehouse. |
|
|
|
|
|
To Send Order Inquiry, Click Here:
Orders@bbqparts.com |
|
Back
to the Charbroil Page
Back to the Home Page
|